工業生產廠應用的有軌電動平板車一般由架構、推動系統軟件、自動控制系統和電腦操作系統構成。與此同時，因為機器設備在導軌上走動，對路軌鋪裝的需求較高，所以要知道安裝低電壓路軌平板電腦緣層路軌鋪裝方式。

明確車噸數相匹配的路軌型號規格和長短。

確定有軌電動平板車的軌里側距和軌核心距，保證準確。

路軌鋪裝分成一般路軌和絕緣層路軌，緣層路軌僅適用KPD型低電壓路軌。

配電電動平板車。因為有軌電動平板車噸數比較大，因而應在路軌下做預制構件基礎梁。

提前準備一系列土建工程專用工具，如混凝土、石料、傻、建筑鋼筋、水準儀等。

緣層路軌鋪裝技術標準高，鋪裝欠佳造成短路故障，導致車子不可以正常的應用，提議資詢專業技術人員。

杭州豪順電動車輛有限公司設計研發、制造、銷售、服務于一體的倉儲物流搬運設備專業制造企業，年生產能力達600臺以上，是專業生產電瓶車，平板拖車，電動平車，軌道車的廠家。

The rail electric flat car applied in industrial plants is generally composed of architecture, propulsion system software, automatic control system and computer operating system. At the same time, because machines and equipment move on the guide rail, there is a high demand for rail pavement, so we should know the way of installing the insulation layer of low-voltage rail tablet computer.

Specify the model, specification and length of the track matching the vehicle tonnage.

Determine the inner rail side distance and rail core distance of rail electric flat car to ensure accuracy.

The track pavement is divided into general track and insulated track. The insulated track is only applicable to KPD low-voltage track.

Power distribution electric flat car. Because the tonnage of electric flat car with rail is relatively large, the prefabricated component foundation beam should be made under the rail.

Prepare a series of special tools for civil engineering in advance, such as concrete, stone, concrete, building reinforcement, level gauge, etc.

The technical standard of insulating layer rail pavement is high, and the poor pavement causes short-circuit fault, which leads to the abnormal application of the vehicle. It is suggested to consult professional technicians.